NANOR 2.0 mm

Efficast Properties
Thermoforming conditions
Thickness 2.0mm (1/12") 2.0mm (1/12")
Perforation Micro Micro+
Optimum activation temperature (in water bath) 65 °C (149 °F)  65 °C (149 °F)
Activation time (in water bath) 3 to 4 minutes 3 to 4 minutes 
Transparent when activated Yes  Yes
Working time 1 1/4 to 1 3/4 minutes  1 1/4 to 1 3/4 minutes
Hardening time
3 to 4 minutes  3 to 4 minutes
Time to completion 10 to 11 minutes  10 to 11 minutes
Resistance to stretch Low Low
Drape High High
Memory (after 200% elongation) moderate moderate
Maximum elongation when activated 2400% 2400%
Memory (after maximum elongation) moderate moderate
Sticks to itself when activated and wet No No
Sticks to itself when activated, after drying No No
Adhesion (velco strip) using heat gun N.A. N.A.
   
Mechanical properties at 21°C (70°F)  
Flexural modulus 450 MPa 300 MPa
Elastic modulus N.A. N.A.
Tensile strength N.A. N.A.
Strain at break N.A. N.A.
Shore D hardness 61 61
   
General properties  
Density 1.17 g/cm3 1.17 g/cm3
Surface feeling Smooth Smooth
Color beige beige
Odor None None
Fatigue Cycles +10.000 cycles +10.000 cycles
Biocompatible Yes Yes