ORFILIGHT 1.6 mm
Efficast Properties | |||
Thermoforming conditions | |||
Thickness | 1.6 mm (1/16 Inch) | ||
Perforation | Micro | ||
Optimum activation temperature (in water bath) | 65 °C (149 °F) | ||
Activation time (in water bath) | 3 to 4 minutes | ||
Transparent when activated | no | ||
Working time | 1.0 to 1,5 minutes | ||
Hardening time |
1.75 to 2.25 minutes | ||
Time to completion | 10 to 11 minutes | ||
Resistance to stretch | Moderate | ||
Drape | High | ||
Memory (after 200% elongation) | High | ||
Maximum elongation when activated | 1800% | ||
Memory (after maximum elongation) | High | ||
Sticks to itself when activated and wet | Yes | ||
Sticks to itself when activated, after drying | Reliable under high stress | ||
Adhesion (velco strip) using heat gun | Yes | ||
Mechanical properties at 21°C (70°F) | |||
Flexural modulus | 260 MPa | ||
Elastic modulus | 170 MPa | ||
Tensile strength | 8.0 MPa | ||
Strain at break | 45% | ||
Shore D hardness | 47 | ||
General properties | |||
Density | 0.85 g/cm3 | ||
Surface feeling | Smooth | ||
Color | Skin | ||
Odor | None | ||
Fatigue Cycles | n.a. | ||
Biocompatible | Yes |