U-PLAST 1.6 mm

U-Plast Properties
Thermoforming conditions
Thickness 1.6 mm (1/16 Inch)
Perforation 13% Micro
Optimum activation temperature (in water bath) 65 °C (149 °F)
Activation time (in water bath) 3 to 4 minutes
Transparent when activated Yes
Working time 0,75 to 1,25 minutes
Hardening time
2,5 to 3,0 minutes
Time to completion 14 to 15 minutes
Resistance to stretch Low
Drape High
Memory (after 200% elongation) High
Maximum elongation when activated 1350%
Memory (after maximum elongation) High
Sticks to itself when activated and wet No
Sticks to itself when activated, after drying No
Adhesion (velco strip) using heat gun N.A.
 
Mechanical properties at 21°C (70°F)
Flexural modulus 450 MPa
Elastic modulus 250 MPa
Tensile strength 15.0 MPa
Strain at break 175%
Shore D hardness 60
 
General properties
Density 1.13 g/cm3
Surface feeling Smooth
Color Soft Blue
Odor None
Fatigue Cycles >10'000
Biocompatible Yes