04-601 - CT laser alignment check version
04-602 - CT laser alignment check and calibration version (with aluminium seeds insert)
04-603 - PET/CT alignment check version (with tungsten ball)

Technical data:

• Made of transparent PMMA 150 x 150 x 50 mm

• Scribed lines are 1 mm wide and white for ease of viewing

• Optional 5.5 mm diameter tungsten ball in the center for sterotactic collimator verification (it is removable for CT applications)

• Optional insert containing 5 aluminium seeds 1 mm in diameter and 5 mm long with a chart  indicating center to center spacing between seeds

Large 150 x 150 mm sides include:

• Centring scribe lines that go across the phantom on one side

• Two large holes 9.5 mm in diameter, 106 mm apart centre to centre in the exact centre of a quadrant of the phantom

Small 50 x 150 mm sides include:

• Scribed lines through the centre of all four sides- 2 of those sides are also scribed 50 mm from the centre

• 3 pinholes one at the centre and two 50 mm from the centre

• Centre pinholes are 2 mm in diameter and hold a tungsten pin 15 mm long

• Centre pinholes are 1.0 mm in diameter

Levelling platform:

• Made of transparent PMMA

• Dimensions: 150 x 150 x 10 mm

• Bubble level and three levelling screws

Product features:

• Complies with:
  - IEC 61223-3-5
  - IEC 61223-2-6

• CE certified

• The manual provides detailed guidelines for carrying out each test, results assessment and registration