Technical data:‍

• Diameter: 160 mm

• Made of PMMA (1.19 g/cm³)

• Total length: 170 mm

• Positioning aids on the outside surface of the phantom

Noise / uniformity section

• Uniform PMMA part of the phantom

‍

5 layer modules section with modules containing

• Linear Spread Function (LSF) PTFE / PMMA interface

• Point Spread Function (PSF) - 0.25 mm tungsten steel wire in air

• XY high contrast resolution (aluminum/polymer) - 1.0, 1.7, 2.0, 2.5, 2.8, 4.0, 5.0 LP/mm

• Z high contrast resolution (aluminum/polymer) - 1.0, 1.7, 2.0, 2.5, 2.8, 4.0, 5.0 LP/mm

• 6 low-contrast groups of 1.0, 2.0, 3.0, 4.0, 5.0, 6.0 mm rods made of: aluminum, PTFE, POM-C (delrin), PE-300, air and water emulating epoxy; background made of PMMA

• 10 mm rods made of aluminum, PTFE, POM-C (delrin), PE-300, air and water emulating epoxy suspended in PMMA - pixel intensity / HU values samples

• Stacked 20 mm diameter contrast-to-noise discs made of aluminum, PTFE, POM-C (delrin), PE-300 and air suspended in PMMA

• Three 5.0 mm diameter titanium rods embedded in PMMA - beam hardening artefacts

Slice geometry section

• 20 mm thick module with two pairs of aluminum ramps and empty rods in vertexes of a square for detailed evaluation of slice thickness and geometry and laser position verification

‍

Geometric distortion section

• An array of 2.0 mm diameter, 3.0 mm long holes uniformly pitched at 10.0 mm intervals

Accessories:

• Test stand with spirit level for accurate placing of the phantom in the test position

• Folding base for test stand positioning on the X-ray unit’s chair

• Convenient, portable case for storing and transporting the phantom

• Optional additional homogeneity disc

‍Product features:

• Complies with:
  – Radiation Protection no 172 report by the SEDENTEXCT
  – IEC 61223-3-4 and IEC 61223-3-5

• CE marked

• The manual provides detailed guidelines for carrying out each test, results assessment and registration