Main cylinder

• Internal cylinder diameter: 206 mm – internal cylinder height: 186 mm

• Cylinder wall thickness: 7 mm

Main insert (slice width, pixel size and high resolution)

• External diameter 200 mm

• Free square internal 80 x 80 mm

• Consists of 10x 5 mm discs, 2 spacers and 3 mounting screws

• Contains a pair of channels 20 x 10 mm thick forming two hot ramps whose slope angle tangent is equal to 0.5

• Contains four hot holes 5 mm in diameter that are located in corners of the 120 x 120 mm square

• Contains four groups of hot and cold resolution patterns that are 2, 4, 6 and 8 mm thick and correspond to 2.5, 1.25, 0.83 and 0.625 LP/cm

Point source insert (PSF - point spread function)

• The fill plug can be positioned at the center or at radial plug location

• Source screw contains a well (Ø3 x 5 mm) that can be filled with appropriate solution

• Source screw can be mounted outside of or inside the phantom (for in air or scatter measurements)

Low contrast inserts

• Can be threaded into the phantom in a radial pattern 75 mm of the center axis

• Three cold low contrast rods comprised of three parts: 10, 15 and 20 mm in diameter and 40 mm long

• Three optional hot low contrast rods comprised of three parts: 10, 15 and 20 mm in diameter and 40mm long that can be filled from the outside

Accessories

• Heavy duty carrying case

Product features:

• Complies with:
  - NEMA Standards Publication (NU 1-2001) Performance Measurements of Scintillation Cameras
  - NEMA Standards Publication (NU-1 2007) Gamma Cameras
  - AAPM Report No. 9 - Computer Aided Scintillation Camera Acceptance Testing
  - AAPM Report No. 22 - Rotating Scintillation Camera SPECT Acceptance Testing and Quality Control
  - ACR–SNM (Res. 5 – 2011) technical standard for diagnostic procedures using radiopharmaceuticals

• CE certified

• The manual provides detailed guidelines for carrying out each test, results assessment and registration