Quality Assurance
Quality Assurance is essential to ensuring safety, reliability, and excellence across all areas of healthcare. Our commitment is to uphold the highest standards in medical practice through continuous monitoring, process improvement, and compliance with international regulations — fostering trust, patient safety, and clinical effectiveness.
Empower Your X-Ray Quality Assurance
RTI X-Ray Multimeters deliver precise, real-time measurements of kV, mA, time, dose, and filtration for diagnostic X-ray systems, ensuring compliance and safety. Paired with versatile accessories like detectors, cables, and phantoms, they simplify workflows, reduce testing time, and support all modalities from mobile units to CT scanners. Achieve reliable results and regulatory confidence with RTI's trusted, user-friendly solutions.
Empower Your X-Ray Quality Assurance
RTI X-Ray Multimeters deliver precise, real-time measurements of kV, mA, time, dose, and filtration for diagnostic X-ray systems, ensuring compliance and safety. Paired with versatile accessories like detectors, cables, and phantoms, they simplify workflows, reduce testing time, and support all modalities from mobile units to CT scanners. Achieve reliable results and regulatory confidence with RTI's trusted, user-friendly solutions.
Elevate Your Diagnostic Imaging QA
Diagnomatic QA phantoms provide precise, reproducible testing for X-ray, CT, mammography, and fluoroscopy systems, ensuring optimal image quality and radiation safety. These robust, versatile phantoms simplify compliance with standards like IEC and ACR, while minimizing setup time and operator variability. Unlock consistent performance and patient confidence with Diagnomatic's reliable, user-friendly solutions.
Elevate Your Diagnostic Imaging QA
Diagnomatic QA phantoms provide precise, reproducible testing for X-ray, CT, mammography, and fluoroscopy systems, ensuring optimal image quality and radiation safety. These robust, versatile phantoms simplify compliance with standards like IEC and ACR, while minimizing setup time and operator variability. Unlock consistent performance and patient confidence with Diagnomatic's reliable, user-friendly solutions.
Popular
Quality Assurance
venTest
Accuracy and Portability venTest is designed to accurately test the performance of Ventilators and Anaesthetic systems. Data analysis and waveforms are generated on-board and displayed on its 7″ touch screen display – no need to carry around a laptop. With a small footprint and internal rechargeable battery, venTest is a very portable Ventilator Test System.
vPad-PS Multi-Parameter Patient Simulator
Used alone or in combination with the vPad-O2, vPad-BP, and vPad-CO2, the vPad-PS provides 6 of the 9 available simulations: ECG, Respiration, Temperature, IBP (invasive blood pressure), IUP (intra-uterine pressure), and Cardiac Output.
vPad-O2 SpO2 Tester
Built on the vPad platform, vPad-O2 is user programmable so new sensors can easily be added in the field without needing to send the unit back to a service centre for upgrading. Being part of the vPad-A1 family, vPad-O2 can be upgraded to include a Multi-Parameter Patient Simulator (vPad-PS) and/or a NIBP Simulator (vPad-BP).
vPad-BP NIBP Simulator
Being part of the vPad-A1 family, vPad-BP can be upgraded to include a Multi-Parameter Patient Simulator (vPad-PS) and/or SpO2 Simulator (vPad-O2)
vPad-A1 All-in-one Vital Signs Simulator
Datrend Systems’ vPad-A1, based on our revolutionary Vision-Pad Technology, is an all-in-one patient simulation system. vPad-A1 is modular and is comprised of a Multi-Parameter Patient Simulator, SpO2 test module, and a Non-Invasive Blood Pressure simulation module which may be used together or independently in various combinations, with an Android handheld device or vPad tablet providing the user interface.
vPad-IV Infusion Device Analyzer
vPad-IV is the most advanced Infusion Device Analyzer on the market today. Its unique yet simple slide-and-click modular system will allow users to arbitrarily configure each analyzer between 1 – 6 channels. Meaning you could start with a single channel today and add more testing capabilities over time to increase your testing throughput since simultaneous testing can be done on all available channels. The modular system will also allow you to send an individual channel to an authorized service center for annual calibration while minimizing your down-time, or perhaps you wanted to reconfigure your vPad-IV into a portable unit before visiting an offsite location.
vPad-IN Incubator Analyzer
vPad-IN is a next generation infant incubator and radiant warmer testing system that meets the requirements of the IEC Standards for Incubators (IEC 60601-2-19), Transport Incubators (IEC 60601-2-20) and Radiant Warmers (IEC 60601-2-21).
vPad-RF ESU Analyzer
Introducing vPad-RF, the smallest full-featured analyzer for testing Electrosurgical Units (ESUs). Built on Datrend’s revolutionary Vision-Pad platform, each unit comes with a built-in HF Digital Oscilloscope and Spectrum Analyzer.
venTest
Accuracy and Portability venTest is designed to accurately test the performance of Ventilators and Anaesthetic systems. Data analysis and waveforms are generated on-board and displayed on its 7″ touch screen display – no need to carry around a laptop. With a small footprint and internal rechargeable battery, venTest is a very portable Ventilator Test System.
vPad-PS Multi-Parameter Patient Simulator
Used alone or in combination with the vPad-O2, vPad-BP, and vPad-CO2, the vPad-PS provides 6 of the 9 available simulations: ECG, Respiration, Temperature, IBP (invasive blood pressure), IUP (intra-uterine pressure), and Cardiac Output.
vPad-O2 SpO2 Tester
Built on the vPad platform, vPad-O2 is user programmable so new sensors can easily be added in the field without needing to send the unit back to a service centre for upgrading. Being part of the vPad-A1 family, vPad-O2 can be upgraded to include a Multi-Parameter Patient Simulator (vPad-PS) and/or a NIBP Simulator (vPad-BP).
vPad-BP NIBP Simulator
Being part of the vPad-A1 family, vPad-BP can be upgraded to include a Multi-Parameter Patient Simulator (vPad-PS) and/or SpO2 Simulator (vPad-O2)
vPad-A1 All-in-one Vital Signs Simulator
Datrend Systems’ vPad-A1, based on our revolutionary Vision-Pad Technology, is an all-in-one patient simulation system. vPad-A1 is modular and is comprised of a Multi-Parameter Patient Simulator, SpO2 test module, and a Non-Invasive Blood Pressure simulation module which may be used together or independently in various combinations, with an Android handheld device or vPad tablet providing the user interface.
vPad-IV Infusion Device Analyzer
vPad-IV is the most advanced Infusion Device Analyzer on the market today. Its unique yet simple slide-and-click modular system will allow users to arbitrarily configure each analyzer between 1 – 6 channels. Meaning you could start with a single channel today and add more testing capabilities over time to increase your testing throughput since simultaneous testing can be done on all available channels. The modular system will also allow you to send an individual channel to an authorized service center for annual calibration while minimizing your down-time, or perhaps you wanted to reconfigure your vPad-IV into a portable unit before visiting an offsite location.
vPad-IN Incubator Analyzer
vPad-IN is a next generation infant incubator and radiant warmer testing system that meets the requirements of the IEC Standards for Incubators (IEC 60601-2-19), Transport Incubators (IEC 60601-2-20) and Radiant Warmers (IEC 60601-2-21).
vPad-RF ESU Analyzer
Introducing vPad-RF, the smallest full-featured analyzer for testing Electrosurgical Units (ESUs). Built on Datrend’s revolutionary Vision-Pad platform, each unit comes with a built-in HF Digital Oscilloscope and Spectrum Analyzer.
Quality Assurance
Case Studies
Quality Assurance
Quality Assurance is essential to ensuring safety, reliability, and excellence across all areas of healthcare. Our commitment is to uphold the highest standards in medical practice through continuous monitoring, process improvement, and compliance with international regulations — fostering trust, patient safety, and clinical effectiveness.
Empower Your X-Ray Quality Assurance
RTI X-Ray Multimeters deliver precise, real-time measurements of kV, mA, time, dose, and filtration for diagnostic X-ray systems, ensuring compliance and safety. Paired with versatile accessories like detectors, cables, and phantoms, they simplify workflows, reduce testing time, and support all modalities from mobile units to CT scanners. Achieve reliable results and regulatory confidence with RTI's trusted, user-friendly solutions.
Elevate Your Diagnostic Imaging QA
Diagnomatic QA phantoms provide precise, reproducible testing for X-ray, CT, mammography, and fluoroscopy systems, ensuring optimal image quality and radiation safety. These robust, versatile phantoms simplify compliance with standards like IEC and ACR, while minimizing setup time and operator variability. Unlock consistent performance and patient confidence with Diagnomatic's reliable, user-friendly solutions.
Popular
Quality Assurance
venTest
Accuracy and Portability venTest is designed to accurately test the performance of Ventilators and Anaesthetic systems. Data analysis and waveforms are generated on-board and displayed on its 7″ touch screen display – no need to carry around a laptop. With a small footprint and internal rechargeable battery, venTest is a very portable Ventilator Test System.
vPad-PS Multi-Parameter Patient Simulator
Used alone or in combination with the vPad-O2, vPad-BP, and vPad-CO2, the vPad-PS provides 6 of the 9 available simulations: ECG, Respiration, Temperature, IBP (invasive blood pressure), IUP (intra-uterine pressure), and Cardiac Output.
vPad-O2 SpO2 Tester
Built on the vPad platform, vPad-O2 is user programmable so new sensors can easily be added in the field without needing to send the unit back to a service centre for upgrading. Being part of the vPad-A1 family, vPad-O2 can be upgraded to include a Multi-Parameter Patient Simulator (vPad-PS) and/or a NIBP Simulator (vPad-BP).
vPad-BP NIBP Simulator
Being part of the vPad-A1 family, vPad-BP can be upgraded to include a Multi-Parameter Patient Simulator (vPad-PS) and/or SpO2 Simulator (vPad-O2)
vPad-A1 All-in-one Vital Signs Simulator
Datrend Systems’ vPad-A1, based on our revolutionary Vision-Pad Technology, is an all-in-one patient simulation system. vPad-A1 is modular and is comprised of a Multi-Parameter Patient Simulator, SpO2 test module, and a Non-Invasive Blood Pressure simulation module which may be used together or independently in various combinations, with an Android handheld device or vPad tablet providing the user interface.
vPad-IV Infusion Device Analyzer
vPad-IV is the most advanced Infusion Device Analyzer on the market today. Its unique yet simple slide-and-click modular system will allow users to arbitrarily configure each analyzer between 1 – 6 channels. Meaning you could start with a single channel today and add more testing capabilities over time to increase your testing throughput since simultaneous testing can be done on all available channels. The modular system will also allow you to send an individual channel to an authorized service center for annual calibration while minimizing your down-time, or perhaps you wanted to reconfigure your vPad-IV into a portable unit before visiting an offsite location.
vPad-IN Incubator Analyzer
vPad-IN is a next generation infant incubator and radiant warmer testing system that meets the requirements of the IEC Standards for Incubators (IEC 60601-2-19), Transport Incubators (IEC 60601-2-20) and Radiant Warmers (IEC 60601-2-21).
vPad-RF ESU Analyzer
Introducing vPad-RF, the smallest full-featured analyzer for testing Electrosurgical Units (ESUs). Built on Datrend’s revolutionary Vision-Pad platform, each unit comes with a built-in HF Digital Oscilloscope and Spectrum Analyzer.
